Description

RX40-2 Universal 24V DC 30A relay remote control switch kit For remotely turn on and off 24V DC application uses in automobile, motorcycle, boat, RV, boat, home, garden, hunting tool and any 24V device . receiver comes with wires for easy installation. RX40 works with any device that operate from 24V DC Require a 24v dc power supply Specs: Kit included: 1 switch receiver box, 2 water resistant remote control key fob Dimension: 2 1/2" x 2 1/2 x 1 3/8" Remote mode: on and off, toggle mode Remote range: ~60ft/~20m (Remote range and signal strength depend on where device is setup, battery strength, interference, etc.) Receiver Input/output power: 18V to 24V DC standby current: 7.5mA Relay standby state: normally open Relay max load: 30A Operating current: 10mA Operate Temp: 0F~135F How does this remote work? When 24v is feed into the receiver's red/black wire, receiver is in standby mode, current draw at 7.5mA, and relay stays in "open" mode. When remote transmitter is depressed, receiver's internal relay then closed, current draws 7mA with no load, and 24V DC is present at the output white+/black- wires. Maximum load to the relay receiver is 20A. When remote transmitter is depressed again, relay return to "open" state, and receiver is back in standby mode and continue to draw 7.5mA from your power supply unless the power is shut down.