Description

RS90: Universal 9V DC remote control switch kit For remotely turn on and off small 9V DC application uses in automobile, motorcycle, boat, RV, boat, home, garden, hunting tool and any 9V device receiver comes with wires for easy installation. Specs: Kit included: 1 switch receiver box. 2 remote transmitters (batteries included) Dimension: remote 2"x 1 3/8" , receiver box 2 1/8" x 1 7/8" Remote mode: on and off mode Remote range: ~50ft (Remote range and signal strength depend on where device is setup, battery strength, interference, etc.) Receiver Input power: 9V DC only *for best result, use 9v acid liquid battery or 9v DC adapter to power this switch. 9v alkaline battery does not have enough charge to operate this switch continuously and can result in intermittent operation. Receiver output: 9V DC standby current: 4.5mA Relay standby state: normally open Maximum load: 5A Operate Temp: 0F~135F How does this remote work? When 9v is feed into the receiver's red/black wire, receiver is in standby mode, current draw at 4.7mA, and relay stays in "open" mode. When remote transmitter is depressed, receiver's internal relay then closed, current draws 7mA with no load, and 9V DC is present at the output white+/black- wires. Maximum load to the relay receiver is 3A. When remote transmitter is depressed again, relay return to "open" state, and receiver is back in standby mode and continue to draw 4.7mA from your power supply unless the power is shut down. Need a different voltage remote?