Description

Notice: This 40amps switch can be matched with remote which is 433.92 Fre.So you can add more remotes. The smart switch provide wireless control of lamps, heaters, fans and more - with no subscription or hub required. Product Specifications: Voltage: AC/DC 7V-36V,50 / 60 Hz Load: 40 A MAX Standby Power Consumption: <0.5 W Working environment: Indoor Working Temperature: -10℃~45 ℃ Humidity: ≤80% RH Wireless Communication Range: 100 m / 328 ft Material: V0 flame-retardant material Dimension: 123 x 61 x 31 mm Net Weight: 135 g How to set remote mode: 1.Clean code ,clear all remote control data: Press the remote pairing button 8 times to clean code if you want to reset mode.(if you just want to add more remote, no need to clean code). 2. Setting momentary mode: Press pairing button 1 time,red LED light on,then press the remote control button,red LED flash 3 times then off.setting successfully. (Press remote control button,relay ON,release the button relay OFF ) 3. Setting Toggle mode: Press pairing button 2 times fast,red LED light on,press the remote control button,red LED flash fast, then off. (Press remote control button, the receiver’s relay is ON,press button again,the receiver’s relay is OFF) 4. Setting Latched Mode: (Note:When you choose “Latched Mode”,you need to setting two different buttons on the remote control,the first time lean is for “ON”,the second time learn for “OFF” For example:button A=ON,button B=OFF) Press the pairing button 3 times fast,red LED light on,then press the remote buton A,red LED flash 3 times, then press the remote button B, red LED flash 3 times again ,and then come off,setting succssfully (Press remote button A,relay on,press remote button B,relay off) This switch can be set timer function for 5,10,15,20 minutes ,check the manual guide for more info pls Package Includes: 1x Remote switch 1x Remote control(battery not included,it works with 23A12V battery)